Main > Main Forum

Wiring Coin door to turn on PC - Microswitch?

<< < (8/9) > >>

dreamakuma:
Anyone have a metod of wiring a coin return for A williams return without the coin mech? I take pics later if I have too.

Ginsu Victim:

--- Quote from: Namco on March 26, 2009, 03:17:34 am ---Yeah dude, that's just genius. Using the NC side of the switch like that. Why didn't I think of that? Thanks for the idea!!  :applaud:

--- End quote ---

Yeah, I slapped my forehead on that one.

smalltownguy:
LOTS and LOTS of searching on this forum, and I finally found my solution for coin reject buttons for credits. Thanks, folks. This will get 2 more buttons off my crowded CP.

 :notworthy:

njay:
what i have actually:

2 coin mechs with fronts

1. for visual pinball add credt wired to my x-arcade 1 player button (this adds credits for vp)
2. for mame add credit wired to my x-arcade left flipper button (this adds credits for vp)

i had an original coindoor and i wanted to keep some classic parts on the door, i sawed a gap out beneath the old coin in button and mounted the newer front with mech beneath it i cann add credits in the new mech but still have the original coin in button present.

garnerb350:

--- Quote from: johnnyr on March 25, 2009, 02:54:52 pm ---Thanks for info guys...I WOULD like to wire them as coin up buttons, but I'm not using an IPAc or anything right now, just a tankstick.

For the connection to the microswitch, should I put on some quick disconnect terminals? Or just wire and electrical tape?

--- End quote ---

Johnnyr, you can wire them up to the tankstick....I bought a set of the unreal coin door lights pushbuttons from GGG and I have them wired to the 3&4 buttons on the tankstick...the contacts in the tankstick are big enough to push and hold extra wiring...

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version