Arcade Collecting > Pinball

Solenoids still fire incorrectly... *FIXED*

<< < (3/3)

RichSorr:
I believe those are .100 pins

gajaman:
Are these correct?

http://www.mechatronics-onlineshop.co.uk/mse-09-b-254mm-crimp-terminal-391-p.asp

ChadTower:

Don't pick and choose, order tons of male and female pins and a few connectors.  You will eventually need them and at least then you have them all.

gajaman:
My pins arrived in the post this morning and I set about changing the two defective pins on the MPU J4 connector.

I was too cheap to buy a crimper (£20) so I used a pair of pin nose pliers which worked just fine.

Plugged it in and all is now well! All of the solenoids fire, and at the right time - Yes!

Amazing how much difference it makes having thumper bumpers that work! Also many sounds that
I haven't  heard before are now present. Don't know why this is?

Thanks for the help guys.

Navigation

[0] Message Index

[*] Previous page