Main > Main Forum
coin mech wires have disconnected
(1/1)
Broken:
i have no idea which wire goes into which hole. basically its 2 black wires 1 pink wire and one stripey black/orange wire.
its not really something i wanna play around with until i figure out which goes where. any help will be appreciated.
i'm using a electrocoin goliath arcade cabinet.
wires
coin mech
the wires connect to the holes beneath the 5 screws. (bottom right hand corner in the pic)
Broken:
bump.
SirPeale:
It's the weekend. It's slower now because everyone is off building.
Please don't bump until it's off the front page. It's only been seven hours.
CheffoJeffo:
Patience, young paduan ...
Where do those wires go ? What game is plugged in to the harness ?
Wire colours are not always (indeed, when there is question, most often are not) indicative of anything.
I would expect one of the wires to be a positive voltage for power, one to be a ground return for power, one to be a common ground and one to be a coin up switch.
Perhaps one of our UK friends can shed more light (WTF would somebody use a different 56-pin standard from JAMMA ?), but tracking the four wires back to their sources (presumably on a 56-pin harness) should reveal the answers that you are looking for.
http://www.hardwarebook.info/Electrocoin
Broken:
more pics
http://boxstr.com/view/4799574_5mo0u
http://boxstr.com/view/4799574_5mo0u
http://boxstr.com/view/4799573_2fmao
http://boxstr.com/view/4799898_mmepw
http://boxstr.com/view/4799899_wod53
http://boxstr.com/view/4799901_52lyq
http://boxstr.com/view/4799908_sgvx1
Navigation
[0] Message Index
Go to full version