Arcade Collecting > Pinball

1977 Gottlieb Vulcan repair manual needed * NOW WORKING *

<< < (2/2)

shardian:
I did do a search for this yesterday, and found pretty much every Gottlieb manual EXCEPT for Vulcan.  ;D

Cyberflexx:
Yeah no dice here either..


If you come across a good scan of the plastics, let me know.  I need to make a reproduction of one of the slingshots.  I snapped mine into peices when the vertical playfield slipped outta my hand, then slammed the wall..  :angry:

I confirmed the Pin is mine.. for free.  My boss is going to help me troubleshoot the relays, and I fund the repairs, then he will help me take it home in his truck. 

Cyberflexx:
A very special thanks goes to a nice guy named Brian ( who i randomly found on the net by going through old forums) who was kind enough to send me the scans of his Vulcan and some pictures of the relay banks and such.  I was able to find where my wires were suppose to be soldered and the pin now plays!!!  WOOO HOOO!

I noticed the P1 score reel in the 1,000 place didnt work, then of a sudden it started working, I am guessing the sparks burnt off the dust and is now making a better connection???

The 5bank drop targets is having a problem, only 3 of the register, I am going to check the ground wire on them later today..

Brian also has a playfield, that I purchased off him, since mine is very very bad.

Here are a couple pictures..

Not bad for machine that was given to me!!!!

I dont know if Brian uses this forum, but THANKS AGAIN!

Navigation

[0] Message Index

[*] Previous page