Main > Main Forum
Monitor Glass Thickness
shardian:
Split the difference and go 3/16".
Ginsu Victim:
--- Quote from: shardian on January 14, 2009, 11:20:47 am ---Split the difference and go 3/16".
--- End quote ---
You just gotta be different, huh?
Visitor Q:
--- Quote from: shardian on January 14, 2009, 11:20:47 am ---Split the difference and go 3/16".
--- End quote ---
hahaha
It's like you read my mind Shardian!
I been reading some back posts here and it seems like 3/16" and 1/4" come up the most.
ps. On a side not I see pinball machine glass is 3/16". That is a very big piece of glass, you know people are going to be leaning on that at some point and time.
CheffoJeffo:
3/16" tempered glass will do it -- just be careful with the edges (e.g. don't set it down roughly on edge on a concrete floor).
HaRuMaN:
--- Quote from: CheffoJeffo on January 14, 2009, 12:18:17 pm ---3/16" tempered glass will do it -- just be careful with the edges (e.g. don't set it down roughly on edge on a concrete floor).
--- End quote ---
Someone did that with a pinball playfield glass at the Superauctions I went to...
*boom!*
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version