Main > Main Forum

looking for help with jamma wiring in golden tee fore power supply burned up

(1/2) > >>

ctozzi:
I bought a Blitz 99 empty cabinet for 150.00 since it's almost perfect and had a medium resolution monitor perfect for golden tee fore. i have everything but need a little guidance on the jamma wiring for the buttons, and the 200 watt green board power supply. I have purchased the power bypass cable from gatorcade.com, so i think i now have everything i need. Just looking for a few pictures of the wiring inside the cabinet off the pcb, and what i do with all the power wiring coming from the pcb. Thanks for the help

TOK:
itsgames has their manuals posted. If this doesn't help you, I'll get some pics of my GT, but its also in Work-In-Progress state.  ;)

http://www.itsgames.com/itsgames/Support/Manuals/

ctozzi:
i have that it helped about 80% i would like to see a few pictures of the jamma connector, power supply and pcb

TOK:
I'll try and get some pics for ya tonight.

TOK:
I got a couple pics... Don't have great light in the garage at night, but I wanted to try and get you something.
I didn't resize these images, so they're huge (10 megapixel). I figured the large size might let you get a look at the wire colors you need to know. I'll just link them.

JAMMA connector:
http://tok.home.comcast.net/~tok/temp/IMG_3197.JPG

JAMMA connector from other side:
http://tok.home.comcast.net/~tok/temp/IMG_3196.JPG

Button wire colors. Sorry this one didn't come out great due to low light, but I think the colors are visible.
http://tok.home.comcast.net/~tok/temp/IMG_3194.JPG

If there is something else that'd help you just let me know and I'll try and take a look for ya.



Navigation

[0] Message Index

[#] Next page

Go to full version