Main > Main Forum
Momo and G25 Steering
BadMojo12:
I am designing my control panel and I want to have enough "lip" on the front of the panel to accommodate a G25 or Momo Steering wheel. I saw great discussions and YouTube video on these wheels for mame, but find nothing on the "footprint"--over and under the panel--required for these wheels. Any information on this will be greatly appreciated.
Ryan
Ginsu Victim:
Edit: Previously in wrong forum.
Flake:
I'm not at home right now and so cant measure to be sure but you dont need much more than 5"-6" if that, on the top of the panel. The underneath of the "lip" will only require a couple inches. I'm using a standard 2p control panel from ArcadesRFun and have enough clearance.
drawfull:
For the G25, 6.75" gives you a few mm spare on top. You need appx 1.25" beneath horizontally. It's difficult to easure on my setup (cramped)
The gearshift needs the same, but it looks like
\
\
\________ in profile so make sure you have nothing vertical behind it that would get in the way
BadMojo12:
Thanks drawfull, that's exactly what I needed :applaud:
Flake, yours is also helpful, do you have a G25 or a Momo?
RC
Navigation
[0] Message Index
[#] Next page
Go to full version