Arcade Collecting > Pinball
The Buck Rogers Project
Cyberflexx:
I pinned one of the connectors last night and decided to plug it into the new board. the machine came on, made some startup sounds, all my display lights work. Message says stuck switch and the popout hole keeps kicking out every 20 seconds and sometimes the displays will say Driver on it. I know I still need to repin a few more connectors as well, which that might be the problem. A couple times the displays same SLAM and one other time it said Tilt, it's got to be the other pins. I'll try to get to more of that tonight.
Shardian, can I borrow your manual since I didnt get one with my board?
shardian:
--- Quote from: Cyberflexx on March 19, 2009, 08:58:16 am ---
Shardian, can I borrow your manual since I didnt get one with my board?
--- End quote ---
Dammit, I keep forgetting to bring that to work to copy! If you can, call me tonight to remind me to throw it in the car.
Cyberflexx:
I got the manual for the P1 board from Shardian, THANKS!!! I did not work on the pin last night since i had a splitting headache.
Cyberflexx:
This pin is bad luck... I have another friggin water leak!!! Everytime I go to start to work on this thing, water appears somewhere in the house. This time a micro hole formed in the supply line to my hot water tank and its misting water out and its draining into my garage.. I have to get a new pipe and install it when I get home from work. I have it temp. patched with some silicone but I dont know how long that will hold under the pressure of the water going through that pipe... :angry: :angry:
Cyberflexx:
Got the water leak fixed that was with the main water line to the hot water tank. Now I can resume the re-pinning, provided I dont have anymore interuptions this weekend..
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version