Main > Main Forum
ATX Power Supply powering Jamma or vice-versa.
Numbski:
So I'm wondering if there's any extensive documentation out there on this topic. I'm 90% certain that an arcade power supply has all of the lines required to power an ATX mainboard, and an ATX Power Supply has the lines needed to power a Jamma-compliant arcade board.
I'm trying to save some space inside the bottom of my cabinet. I know that an ATX board has some sort of power sensing that I can't just hack it up and turn it on. I know wattage might be a concern, but let's presume I have a nice solid 600 or 700 watt power supply - something that could easily power both a PC and a Jamma Board simultaneously without issue.
Are there any solid guides on this topic? If I can have just one power supply inside the cab instead of 2, it would go a long way for me. I'm torn as to which one I would want to keep. I guess it would be nice to throw the switch for the arcade PSU and just bring that up with the monitor, and if I want to run Mame, perhaps toss a second switch to bring up the PC.
grantspain:
you can bypass the power switch on an atx easily
one thing that an atx will not give you an adjustable +5 v ,not strictly that important but older boards do need +5 at the correct level
if you had a standard switch mode in then you will not have the outputs required to run a pc
Numbski:
Could you clarify what you mean? "Standard switch mode, then you would not have proper inputs to power a pc".
grantspain:
a standard jamma switch mode supply will have the following outputs
+5
+12
ground
-5 or +24
you pc mobo needs -12v,3.3v
Numbski:
Ah, I see. So really if I'm going with one power supply, it needs to be an ATX. Not a problem. Just need to figure out how to bypass the auto-sensing on so that I can control which device gets powered on and when.
So far as the concern about +5V, couldn't I just wire a potentiometer in-line between the 5V line of the power supply and the Jamma harness?
Navigation
[0] Message Index
[#] Next page
Go to full version