Main > Main Forum
flipper buttons without springs?
Ginsu Victim:
It has an e-clip on bottom. Pop that off and the plunger will come out. Just remove the spring and reassemble.
Broken:
--- Quote from: GinsuVictim on July 28, 2008, 04:33:24 pm ---It has an e-clip on bottom. Pop that off and the plunger will come out. Just remove the spring and reassemble.
--- End quote ---
my leafs dont have e-clips. havent seen a leaf with an e-clip before.
Ginsu Victim:
Mine do.
Broken:
is it even possible to remove a spring on a leaf switch without an e-clip.
RandyT:
--- Quote from: Broken on July 28, 2008, 11:15:29 pm ---is it even possible to remove a spring on a leaf switch without an e-clip.
--- End quote ---
I'm only familiar with the old school type that had the clips. What do these use to keep the plunger from flying out of the bezel? Is a photo or at least a description of the mechanism possible?
If it looks like squished plastic or a glued on part, then they are most likely sealed so the spring couldn't be removed without ruining them.
RandyT
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version