Main > Main Forum

SlikStik Overlays Now Available on Mameroom Controllers

<< < (2/7) > >>

Teknique:

--- Quote from: Havok on July 13, 2008, 07:27:39 pm ---Looks nice, but for that price you really need to ditch the trackball mounting plate.

--- End quote ---

agreed- up the price and route it out- keep the plexi and use a high lip tb to avoid pinch points.  Also might consider lipped t-molding to avoid the screw holes around the cp.

Overall though not a bad price.  Considering the controls and materials are more than half the cost of the unit.  that is if it comes with a controller... Does it come equipped with an ipac or keywiz?

Mameroom:
Thanks for the feedback and suggestions, I will look into those.  The prototype for sale has a keywiz, but our Classic controllers will have IPACs in the near future.

Minwah:

--- Quote from: Mameroom on July 13, 2008, 07:46:23 pm ---We can mount the trackball flush by routing out underneath the control panel and mounting the trackball without a plate...however, we would not be able to offer the clear plastic cover with this option as it would create "pinch-points" around the trackball.

--- End quote ---

Alternatively you could keep the plate but flush-mount it by routing the top of the panel. This way there are no pinch points (if I understood correctly what was meant by that).

Havok:
Or you could use this:

FrizzleFried:

--- Quote from: Mameroom on July 13, 2008, 08:36:17 pm ---Thanks...Current turn around time is 1 week.  The flush-mount option will be available in the next couple of weeks...but the clear plexiglas cover will not be an option on the flush mounts.

--- End quote ---

Why not?  My control panel has a plexiglass cover and flush mounted trackball?  I am a little confused as to these "pinch points"?  The plexi sits flush with the plastic trackball rim...if you cut the plexi nice it provides a nice transition from plexi to plastic rim to ball.  If you're that worried simply round the plexi slightly with a router?


EDIT: BTW,  by purchasing these "SlikStik" designs,  are folks contributing to the coffers of the person who allegedly stole money from more than one person of this community?

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version