Main > Main Forum

YDKJ Controller (was: Aw crud.)

<< < (2/8) > >>

Chris:
Washers would work if I could find an appropriate one... 1.125" inner diameter with about a 1.375" (1-3/8") to 1.5" outer diameter.  The question is what kind of washer would fit these specs that I could get at Home Depot?  I'm thinking perhaps some bit of chrome or stainless trim meant for plumbing or something.  If I have to order something I may as well just order a new plate and start over from scratch.

Minwah:
Sorry about that...I know how things like that feel  :-\

My advice is before making any more metal panels, get a suitable metal hole punch - they are worth their weight in gold.

boogieman:
You can check mcmaster.com for washers that may work.  I bet you can get brass, stainless, and any other material you can think of!

meany:

--- Quote from: Chris on June 27, 2008, 10:43:13 am ---Washers would work if I could find an appropriate one... 1.125" inner diameter with about a 1.375" (1-3/8") to 1.5" outer diameter.  The question is what kind of washer would fit these specs that I could get at Home Depot?  I'm thinking perhaps some bit of chrome or stainless trim meant for plumbing or something.  If I have to order something I may as well just order a new plate and start over from scratch.



--- End quote ---

You can alway drill out the inside of the washer to the correct size you need.

Chris:

--- Quote from: meany on June 27, 2008, 04:01:57 pm ---You can alway drill out the inside of the washer to the correct size you need.

--- End quote ---
Well I think we've already determined that my metal-drilling skills are a bit dodgy...

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version