Main > Main Forum

Does your cabinet fit through a standard door?

<< < (2/3) > >>

Teknique:
UA2 cabs needs to be taken apart into three pieces (but that is the reason they are designed that way).

arzoo:
You can always remove the door from it's hinges to gain a couple extra inches - that's what I had to do (my cab has a 27" monitor).

Stub:
I built in 3 pieces, ( well cp is not finished yet ) My top is 29.5". I can fit it if I take my door off the hinges, but the depth is several inches less so I can C it through most any doorway. Bottom is 28" no problem there.

TOK:
The two cabs I have in the main part of my house are conversions (a 25" Dynamo and a Bally Midway Rampage style cab) with fixed control panels. I have to take the door off the hinges and also remove the door trim to get them through. I've done it a few times, and it's no big deal once you try.

If you need to pop the trim, I recommend getting a painters tool. It looks like a scraper, but has a strong blade. Makes it easy to pry up trim without marking up the wood or paint, unlike a pry bar or screwdriver.

Dustin Mustangs:
This is a 30" door and a 27" tv.  Have to take off the cp to do it tho.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version