Main > Main Forum

Where Can I Get an Old Serial Floppy Drive?

<< < (3/5) > >>

urbecrisch:

--- Quote from: paigeoliver on April 16, 2008, 11:29:16 pm ---You will probably still need to pick up a 2.5" to 3.5" adaptor to copy your files, but it will be way easier (and cheaper) than trying to deal with an external floppy.

--- End quote ---

I have a 2.5" to 3.5" adapter and have tried to boot install files but  Idid not have any success cause the spare PC I was trying to use could only BOOT an OS from a RESTORE CD so I gave up on doing that.  I know there's got to be a way to get this thing up and running but I'm not quite sure what to do since I am a complete NOOB regarding BOOTING OS's and reformating HD's, and don't even get me started on DOS :(  I'm not going to give up, I just need a nice somewhat simple way to do this.  Thanks for working with me on this project.  If only the MB had a floppy IDE port this would be a breeze!

paigeoliver:
If that thing has a PCI slot than a PCI ide card will just plug in and function, and you should be able to boot from drives attached to it.


--- Quote from: urbecrisch on April 17, 2008, 01:16:59 am ---
--- Quote from: Thenasty on April 16, 2008, 11:16:30 pm ---I dunno if this is the same guy about this machine.....in other post before.

--- End quote ---

I think that would be me :)


--- Quote from: Thenasty on April 16, 2008, 11:16:30 pm ---If so, why not just connect a CD-ROM and a HARD (MASTER/SLAVE) and BOOT of the CD-ROM with Win98 or DOS 7.1 ? Goto BIOS to setup boot priority.

--- End quote ---

The reason I cannot use a USB CDROM is because the BIOS does not offer a BOOT from USB.  Only A,C, CDROM (but only connection is through parallel port but I cannot load any CDROM drivers), and a few others.


--- Quote from: Thenasty on April 16, 2008, 11:16:30 pm ---Also, is there a ISA/PCI SLOT available ? If so, why not get a IDE CONTROLLER and use the NORMAL FLOPPY DRIVE with it ? Disable in BIOS the built in controller.

--- End quote ---

The PIC below shows the available PCI slot (white) and the 2 AGP slots (black)?  Not sure if I'm right about this but what your telling me is I can buy a PCI card which will allow me to plug in my floppy or CDROM via IDE?  Don't I need a driver to allow this PCI card to work?





--- End quote ---

urbecrisch:

--- Quote from: paigeoliver on April 17, 2008, 01:45:02 am ---If that thing has a PCI slot than a PCI ide card will just plug in and function, and you should be able to boot from drives attached to it.

--- End quote ---

This could just possibly be the solution I'm looking for.  Strange that I wouldn't need to install drivers for the PCI card. 

Would this only work with a PCI IDE card or would a PCI USB card work as well? 

Thenasty:
what is that ribbon ? Is that where the HD is connected ? If so, why not connect a cd-rom (maybe you need to change the ribbon for 2 connectctors) to like I said.

I did not mean USB CD-ROM, I meant above..

david656:
"The PIC below shows the available PCI slot (white) and the 2 AGP slots (black)?"  the black slots are ISA you can easily get IDE controllers .. well im sure i got a few ISA ones enyway in the garage....

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version