Main > Main Forum
How tall is your marquee?
CrazyKongFan:
--- Quote from: Zobeid on April 07, 2008, 02:40:37 pm ---An original Defender marquee was 24-1/4 X 7-3/4 inches.
Keep in mind the marquee retainer pieces will hide a bit of the top and bottom.
--- End quote ---
Especially if the top piece is installed with alot of slop in it ;) I have a former Robotron cab that was converted to Final Fight. I believe it has the same dimensions at Defender, but the FF marquee was slightly taller, and they left the screws on top loose so it would hold it in.
NoOne=NBA=:
I'm not going to be much help here.
Mine vary from 3-1/2" to 10".
The 3-1/2" one is a replacement for the factory marquee on a Jaleco Pony cab.
My dedicated cabs all have marquees around 5-1/2".
The 10" is on a home-built.
I made it that big because I needed the room for the art I wanted, and I always liked the oversized marquee on the Sega Star Trek machines.
Ginsu Victim:
23 5/8" x 7 1/4"
Track and Field
phishpac:
the visible area between the marquee retainers is just under 6".
Navigation
[0] Message Index
[*] Previous page
Go to full version