Main > Main Forum

Yoke paint type?

<< < (2/2)

Minwah:
I had a look around and the only clear coat I could find was high-gloss stuff which was no good really.

However I took a chance and bought some Plasti-Kote 'BBQ' black spray paint as it seemed to be a matt finish.  This seems to have worked really well on it's own.  It is matt, but does have a slight 'satin' like finish, which seems more so as more coats are applied.  I found 3 coats of this are really required to get a nice even finish.

I will post some pics when I have put the yoke back together...

Level42:
Isn't there something inbetween gloss and matt overthere ? Here you can get "semi-gloss", which is a nice paint between those two.

Else, you could ask David from RAM controls. He should know everything about those yokes and the painting/powder coating.

Zebidee:

--- Quote from: Level42 on March 03, 2008, 04:56:14 am ---Isn't there something inbetween gloss and matt overthere ? Here you can get "semi-gloss", which is a nice paint between those two.

--- End quote ---

Yeah, they usually call it "satin".

Navigation

[0] Message Index

[*] Previous page

Go to full version