Main > Main Forum
Ipac slow button response?
Turnarcades:
The earths on your control panel/buttons. If they are daisy-chained, make sure there isn't a loose one there.
If the problem was not evident on another PC though, it must be the PC you are using. Nothing to do with performance, as I regularly use PC's between 500mhz-1000mhz with no problems. Either there is a driver conflict with your PC or the ports are damaged.
Go into MAME.ini to find the triple buffering option and change it to 0. Or if using MAME32, go nto the 'default game settings' in the drop-down menus and un-check it, though I now dubt this is the problem.
pressthebutton:
The earths are not daisy-chained.
I'm using a terminal (don't know the exact name for it) to connect player 1 and 2 grounds separately. Then everything is connected to either p1 and p2 Ipac ground input.
Very strange that both pIII mobos act the same way.
It's a long shot that both keyboard inputs are defective...
Tried on a pIV this afternoon and button response was ok.
What the...?
PB
Turnarcades:
It's very unusual, especially as I work with P3's all the time with no problems. Maybe the seperate earthing is causing the problem; all of my panels are daisy-chained and grounded via the i-pac via 1 connection.
Hoopz:
Email Andy at Ultimarc.
pressthebutton:
I'm starting to believe that there is no problem with the Ipac.
Andy as been helping me to troubleshoot the problem and everything points to a non Ipac issue.
When I connect a keyboard directly to any of my pIII mobos keyboard port, I get the key response delay, without any interference from the Ipac.
The only relation between the two pIII mobos is the via chipset.
Could it be some kind of driver missing?
PB
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version