Main > Retail vendors
Sale!! Controller Hacks - Xbox 360, Dreamcast, Xbox, PS2, etc!
Namco:
Aah, I forgot you did this HarumaN. Very nice hacks man. So each 360 controller has about 30 hookups I see. I'll need an enclosure with LPT connectors for it like this:
... so I can connect my controls to it.
I hope I wrote the pinout down somewhere :D
What are the dimensions of the 360 pcb with the wirestrips? What minimum size enclosure would I need to get?
HaRuMaN:
Would you be needing wired or wireless hacks? If wired, I would HIGHLY recommend the MadCatz (GameStop) pad, as it has a common ground and only 16 hookups (vs. 30 for the non-commom ground M$ official pads).
I'll have to do some measuring when I get home...
HaRuMaN:
The madcatz pads are 5.25 by 2.5 by 1 inch, and the terminal strips add a couple of inches...
I would wait until you had the pads in hand to buy a enclosure box. That way you could be certain they would fit.
Bender:
hey HarumaN,
Great work!!
I want to build a FPS CP for my 360 using two analog joysticks
is this possible?
I'd need a wireless controler hack plus I'd need to find out what type of pot the controller uses and how to rewire those to the new joysticks
HaRuMaN:
@ Bender, thanks! :)
Unfortunately, what you want has been requested / suggested many times. As far as I know, it just isn't possible.
The problem lies in matching up potentiometers. You have to match the neutral resistance (stick centered), which in itself probably wouldn't be too hard, but then you would have to match the extremes as well (as in 100% left / 100% right).
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version