Main > Main Forum

Which trackball mounting plate do I need

<< < (2/3) > >>

u_rebelscum:

--- Quote from: LeedsFan on January 15, 2008, 03:28:15 am ---What you have there is the Happs 3" High Lip trackball....

You basically want part no.55-1101-00  or  55-1102-00.

--- End quote ---

LeadsFan is correct.  You have the highlip model.  You can tell because your top piece of the case steps to the lip, and the lip is ~3/16" tall, and the outside diameter of the lip is 3". 

You can get the piece # 55-0321-00, 55-1101-00, 55-1102-00, or even 56-5530-00.  I like the one LeadsFan got too (55-1102-00, zinc) because it's a little smaller than the 55-0321-00 (Golden Tee PGA Tour Version, zinc), but if you aren't going to cover the plate with CP overlay (or paint), get 55-1101-00 (black).  55-0321-00 (Golden Tee PGA Tour Version) is the "extra rugged" version, but the plate is bigger than the others and you don't really need this version unless you really really pound you TB.

u_rebelscum:

--- Quote from: divemaster127 on January 15, 2008, 03:45:12 pm ---you need the black or zinc highball trackball.

--- End quote ---

No. 

He needs the highlip, look at his pictures and this:
The left is the highlip, the right is the highball.  He has the highlip

SQrL:
I got the Electric-ICE trackball from GGG.  I am assuming I just need the standard 3''trackball mounting plate from HAPPS, right (part 55-1101-00 or 55-1102-00)?

LeedsFan:

--- Quote from: SQrL on January 15, 2008, 04:13:04 pm ---I got the Electric-ICE trackball from GGG.  I am assuming I just need the standard 3''trackball mounting plate from HAPPS, right (part 55-1101-00 or 55-1102-00)?

--- End quote ---

Hmmmm.... I really don't know. I've just been to the GGG site and looked at the Electric-Ice trackballs section, but nowhere does it mention the trackball mounting plate. I don't know if they are based on a Happs design or another like Betson. I bought Happs and used a Happs plate. I couldn't say if a Happs plate will work for you. I'd get clarification from someone here before buying. You might even get one with it free?  :dunno

fixedpigs:
beware divemaster's recommendations...

i ordered the standard 3" happs trackball mounting kit for my ggg trackball under his recommendation...

it turns out that the screws are too short to mount the trackball to the mounting plate...so now i have to send it back to him or buy longer screws...

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version