Main > Main Forum

Gauntlet Legends\Dark Legacy

(1/2) > >>

Vincent:
First of all it's a pleasure to be part of this wonderful hobby and this community where I am sure I will spend many a work hour browsing :)

I've been trying to google up some dimensions for the above cabinet but without luck and was wondering if anyone could point me in the right direction. I think the those cabinets look beautiful and would like to base mine around their design.

If not available I'll do my best to replicate it. Thanks in advance.

mccoy178:
I have a Legends cabinet, and I agree that it really is a nice looking cabinet.  Now, this is way, way ahead of where you are at in the building phase, but if you can't or don't have the ability to bend the metal like the front, I would recommend using something like 4-6" pvc cut down to create the curve.  Search for Mountain's cabinet thread in project announcements, as he used some pvc to make small curved corners on his control panel.  Just a thought.  Oh, and welcome to the boards! :cheers:

Vincent:
Thanks for the tips mccoy178 much appreciated. i have had a good look through the project announcements and theres some great projects in there.

I can see this hobby consuming me for the better part of a year, strange forces are at work here :)

I agree I'm probably months away from starting this yet still got a hell of a lot of reading to do :)

bleargh:

--- Quote from: Vincent on January 09, 2008, 11:42:41 pm ---I've been trying to google up some dimensions for the above cabinet but without luck and was wondering if anyone could point me in the right direction. I think the those cabinets look beautiful and would like to base mine around their design.

--- End quote ---

I've got one of these sitting ~10ft from my desk, and I'm sure I've done the measurements before on it.  Let me dig through the archives here and see if its still kicking around somewhere...

bleargh:

--- Quote from: Vincent on January 09, 2008, 11:42:41 pm ---I've been trying to google up some dimensions for the above cabinet but without luck and was wondering if anyone could point me in the right direction. I think the those cabinets look beautiful and would like to base mine around their design.

--- End quote ---

Here it is...

http://forum.arcadecontrols.com/index.php?topic=65656.msg663516#msg663516

That post has a PDF attachment that contains some rough sketches of the cabinet and its dimensions.

If you need other measurements, feel free to ask; I'm (still) working on it (gee, only a year later), and can walk over to it with a tape measure for anything you need.

Navigation

[0] Message Index

[#] Next page

Go to full version