Main > Software Forum

AtomicFe and Daphne Module Question

<< < (3/7) > >>

Havok:
ok, last two suggestions, and then I am at a loss:

1: Uninstall all codecs, re-install just Xvid, and try again
2: Re-download Atomic, install into a different directory, and also re-install the plug and play module and install into that directory. Copy (or move - that's quicker) the Daphne files and try again.

good luck!

Kevin Mullins:
I swear I have done this this over and over again, codec, un-codeced, everything just short of kickin' it...... no-go on the video. 
 :banghead:

It seemed to get worse the more I messed with it. Had to un-install everything just to get things straight again.

Ah-well..... guess I'll move onto the next frontend.

Really appreciate the effort Havoc.   :cheers:

( know anything about Game Launcher? )
 ;D

headkaze:

--- Quote from: Kevin Mullins on January 01, 2008, 12:21:46 am ---I swear I have done this this over and over again, codec, un-codeced, everything just short of kickin' it...... no-go on the video. 
 :banghead:

It seemed to get worse the more I messed with it. Had to un-install everything just to get things straight again.

Ah-well..... guess I'll move onto the next frontend.

Really appreciate the effort Havoc.   :cheers:

( know anything about Game Launcher? )
 ;D

--- End quote ---

You give up too easy, obviously it's something simple your doing wrong. Didn't you say you could run Daphne games outside of AtomicFE? Then how can it be a codec issue if it works outside Atomic? Atomic doesn't play the video Daphne does. Or am I missing something here?

If you don't have Daphne working outside of Atomic you won't get it to work with any front end. All a FE does is launch the emulator, so if the emulator doesn't work by iteself a FE is not the cause of problem.

What I did was use Daphne Loader to configure everything before I tried to get it running in my FE. Your framefiles could be screwed up like mine were. So I recommend you get them working in that first.

Kevin Mullins:
Getting Daphne or Daphneloader is definitly NOT the problem.
I can run it either way, upside down,backwards, whatever the case may be.... Daphne works fine. I can run it from the DaphneLoader or from the RUN command just fine.
And that's exactly why it was getting frustrating, because I have put a couple days into this for several hours straight to always come back to the same result no matter how I configured it. I'm sure it is something simple somewhere.....

I swear it almost looks as if something is still running over top of Daphne when it loads.
That's the best way I can describe it since you can hear it running just fine in the background.

headkaze:

--- Quote from: Kevin Mullins on January 01, 2008, 11:44:04 am ---Getting Daphne or Daphneloader is definitly NOT the problem.
I can run it either way, upside down,backwards, whatever the case may be.... Daphne works fine. I can run it from the DaphneLoader or from the RUN command just fine.
And that's exactly why it was getting frustrating, because I have put a couple days into this for several hours straight to always come back to the same result no matter how I configured it. I'm sure it is something simple somewhere.....

I swear it almost looks as if something is still running over top of Daphne when it loads.
That's the best way I can describe it since you can hear it running just fine in the background.

--- End quote ---

What command line options do you use? I use the following


--- Quote ---vldp -fullscreen -x 640 -y 480 -nohwaccel
--- End quote ---

In my frame files the first lines is simply a "." which means the videos are located in the same folder as the framefile.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version