Main > Main Forum
Coin Door LED's
bent98:
I would like to replace the stock bulbs on my Happ Coin door(http://www.happcontrols.com/coindoors/40000800.htm)
with some super brights(http://www.superbrightleds.com/) question is which ones do I use and will they fit in the happ coin door sockets?
Franco:
You are after a LED bulb with a T 1-3/4 base. Happ do LED replacements for them here or you can get from form superbrights from this page.
bent98:
http://www.superbrightleds.com/cgi-bin/store/commerce.cgi?product=CAR&keywords=&cart_id=8441170.24139&next=50
is that it 2nd from top???
T13 Wedge Base LED bulb
12VDC 6-LED Wedge Base bulb
measure 1 1/8 long by 1/2 inch maximum diameter (194/168 type)
Available in White, Blue, Green, Red, Amber and UV-BlackLight LED
$ 1.99
91-10WB-123R
Red T 3-1/4 Cluster (3) 12 vdc #161, #194
But it says 161, 194 bulb size and superbright is 194/168
Happ has 4 cluster
Franco:
I'm pretty sure the numbers are only to do with the main bulb bodys shape/size. They all have the same wedge base so they will all fit the bulb holder and there is plenty of room behind your coin inserts for the larger diameter bulbs
tomsurfnj:
I used multicolor Led from superbright model # RL5-RGB-ACC. I just taped them behind the coin slots. They look great flashing and changing color. I am going to add one under my trackball in the future.
Just remember to follow polarity.
Navigation
[0] Message Index
[#] Next page
Go to full version