Main > Main Forum
Ultimarc 360 Shaft Rotation
Hoopz:
--- Quote from: efjayel on November 13, 2007, 02:54:52 pm ---Umm, what?
Unless I'm misunderstanding you want to prevent the shaft from being able to rotate. I really doubt thats possible on the U360 or on just about any Arcade joystick. The way they are assembled, they will always rotate. As for preventing the handle from coming loose, the shaft of the u360 has two flat grooves so you can use a wrench to tighten the ball top.
--- End quote ---
I think when he says rotate, he means rotate. He wants it to move, just not rotate or spin around.
fjl:
Yes, rotate like the bit on a drill or a router. From my experience all joysticks shafts spin/rotate like a spinner.
cw:
all but a few... something like assualt the sticks will not rotate....or battle zone..
csa3d:
--- Quote from: jrmitch on November 13, 2007, 02:28:24 pm ---
--- Quote from: squirrellydw on November 13, 2007, 02:15:37 pm ---or you can use BLUE LOCTITE on it. Works great for me
--- End quote ---
Good idea. That's probably what I'll do when I get it into the cabinet.
Thanks guys.
--- End quote ---
Just curious.. say you do this, and down the road you need to take the ball-top off, does this now become an issue?
-csa
AndyWarne:
Another way to do this is to wrap a small amount of plumbers teflon tape around the threads on the shaft and refit the ball.
Andy
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version