Main > Software Forum
u360s and mame32? (Problem solved) well not quite.
Herk:
I think this is so obvious that maybe that is why I can't find any info on my problem. Do u360s work in mame32. What are the correct settings for them. My u360s are configured properly in Windows and the ultramap program works fine as well. The IDs are 1 and 2, as I have 2 u360s. I am so lost right now. :banghead:
Thanks
Herk
Edit = title.
fatfingers:
I see no reason why they shouldn't. You do have to enable joysticks though. Probably a menu option somewhere to do that.
Herk:
fatfingers,
There are options to set to joystick, I have tried different combos including every option set to joystick. I am still :banghead:
Herk
u_rebelscum:
Are you talking about in the UI or in the games? They are enabled and set up differently. Games use "Default Games Properities", controllers, enable joysticks**; for UI go "Interface Options", Allow game selection by a joystick, exit mame32, restart mame32.
Assuming you are talking in game use, and you had correctly enabled joystick support, the sticks might be joystick 3 & 4 or otherwise not mapped to players 1 & 2. Try remapping even you only have the u360 attached, but especially if you have other gaming controllers attached: (tab, inputs general, player 1/2, left, enter, u360 left, ect).
Someone who knows mame32 better than I can help you with using the joysticks in the UI. IIRC, only the first joystick works, but this could have changed since I last used mame32.
**Do it this way since you are using the joystick for digital inputs; the "Controller Mapping" tab is for conditional enabling of devices if a game has the specified analog input.
Herk:
u_rebelscum you,
I got them working 100%. It appears that the u360s must be the first and second devices under Windows. I had a couple of MadCatz controllers and a Logitech wireless freedom joystick hooked up before the u360s. I unplugged those, let the u360s take first and second and voila. I reset defaults in MAME32 and then checked off "enable joysticks". Both u360s work and were tested on Galaga, PacManPlus and Crazy Climber (both sticks simultaneously).
Thanks for the help,
Herk
Navigation
[0] Message Index
[#] Next page
Go to full version