Arcade Collecting > Pinball
I finally got a pin...RESTORED AND LOVING IT.
ChadTower:
That's actually not too bad. I've seen much worse boards come back to life.
Wade:
You guys are crazy. Arcades are far more fun than pins. The only good thing about pin repair is that most of it is well documented on the net and if you can read, you can probably repair the problem. Drawback, Video game boards are usually harder to repair and thus replacement or professional repair are often needed.
Here's why you're both crazy. First of all, Video games are usually easier to clean up and restore (excepting the PCB's). Second, usually after a restore, a video is far more reliable than a pin. Third, even though a pin might work 100% electrically, that doesn't mean it plays well. I've played SO many 100% working pins that actually play like crap, because some mechs or coils are worn. And even after replacing all the worn parts, they still usually take a lot of "tweaking" to really get them playing well. My 2 current pins are great examples, they both have nagging problems even though they work electronically. And even when they truly work flawlessly, it's only a matter of a couple hundred plays before something breaks again or goes out of adjustment. That's the nature of a mechanical device that contains at least one heavy steel ball that is constantly being thrown at. Sometimes a half dozen balls. Even a well sorted game will play funny if it's pushed a little off level or what not. Videogames rarely have these issues, either they work or they don't and either they are clean/restored or they aren't.
I won't even get started on gameplay... ;)
Really though. I think that was a pretty good purchase for the money. Pins are fun to play, and they tend to get more fun the more you play (and the better player you become). With a pin in your house, you'll find yourself playing a lot more pins in the wild, and kicking butt on them too. You'll start winning replays almost every time you play an operated pin. Again, that makes it even more fun too. :) It's not really about winning the virtual $0.50 but just knowing you can "beat the machine." I hardly play any modern videogames out any more, but I always play the pins. After all, pins are still basically the same as they were 30 years ago, not much of a learning curve. I haven't been "up" on the new video games for about 15 years so I hardly play them except for an occasional novelty.
TTYL,
Wade
shardian:
The documentation is why I am having so much fun. With the vids, I spend hours and hours doing research, searching for parts ( if anyone has a spare Xevious bezel PLEASE hookme up! ;D), etc. With this pin, I just printed out the basic pin guide, and the specific sys. 1 repair guide and dug in.
I've also noticed that the wife isn't getting too upset with me working on the pin. She has said she doesn't care too much for the video games because she doesn't like staring at a monitor. I am thinking she is really looking forward to having "her"pin. ;)
ChadTower:
I stop reading any post immediately when the first sentence is an insult. :dunno
Crowquill:
--- Quote from: ChadTower on September 02, 2007, 11:05:01 am ---I stop reading any post immediately when the first sentence is an insult. :dunno
--- End quote ---
Definitely not the best way to start but he has some good points.
I really want a pin but repairs scares the :censored: out of me. Replacing a Xevious bezel may be tough, but replacing some of the plastics in a pin can be even harder.
OTOH, it'll be a whole new learning experience (which I welcome), but I won't be able to skate by without improving my soldering skills like I can on a video. Someday I'll stumble onto a decently-priced pin and be forced to face my fears :)
Looks like you got a nice-looking pin and a good handle on getting it going. I'm sure your wife will love "her" pin.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version