Main > Main Forum

Place TT2 between and below joystick and buttons?

<< < (2/2)

RandyT:

--- Quote from: solderguy1 on August 10, 2007, 06:00:12 pm ---OK, now I understand and it's an important point.  The CP case should be deep enough at that point so the TT2 and energy storage thinkee don't hit bottom.  Thanks for the heads up.

--- End quote ---

Or, you can use a TokenTop Knob instead of an ESC.  Then it would only protrude about 1 5/8" under a 3/4" panel. 

It might get costly if you are looking for the "volume knob symmetry" arrangement mentioned earlier though.

RandyT

solderguy1:

--- Quote from: RandyT on August 10, 2007, 06:10:25 pm ---Or, you can use a TokenTop Knob instead of an ESC.  Then it would only protrude about 1 5/8" under a 3/4" panel. 

It might get costly if you are looking for the "volume knob symmetry" arrangement mentioned earlier though.

--- End quote ---
Thanks for the length number Randy. 
So costly in terms of you not wanting to sell an extra knob, or costly in terms of the time and effort needed to relocate a computer speaker's pot to the control panel and glue or epoxy the knob onto it? 

I get tired of newbies with constant questions, but seems like on this board I've become one  :'(

RandyT:

--- Quote from: solderguy1 on August 10, 2007, 06:22:00 pm ---So costly in terms of you not wanting to sell an extra knob, or costly in terms of the time and effort needed to relocate a computer speaker's pot to the control panel and glue or epoxy the knob onto it? 

--- End quote ---

No, I was thinking that it might be costly for you!  If you really, really wanted to replace the knob on your deep fryer with a TokenTop, I'd sell you two so you'll have a spare.  Who am I to judge?  :D


--- Quote ---I get tired of newbies with constant questions, but seems like on this board I've become one  :'(

--- End quote ---

There are so many skills involved in doing this type of work that you can learn something new every day for a long time.  I've been to commercial kiosk companies with a staff who collectively have less of a clue than some on these boards, so don't be too hard on yourself.

RandyT

Navigation

[0] Message Index

[*] Previous page

Go to full version