Main > Main Forum
Ordering these parts from GGG - have I missed anything?
pboreham:
I think I'm going to get my CP stuff from GGG as it works out much cheaper than anywhere else and mainly because they do the TT2 + Wheel :applaud:.
This is my order so far - I am missing some control interfaces though. If anyone can advise what to get from GGG to work with these *easily* !
1 x Electric ICE-T™ Deluxe RGB Arcade Trackball (does this need mounting plate? Couldnt find one on GGG)
25 x Black Horizontal Pushbutton - HAPP™
1 x Player 1 Pushbutton
1 x Player 2 Pushbutton
2 x HAPP™ Super Arcade Joystick - RED (Will these be ok?)
1 x TurboTwist 2™ Arcade Spinner Control + 6" Wheel
Thanks for any help :cheers:
Xam:
You will at least need an encoder....check GGG for the Keywiz Max.
Also...Ultimarc has a very good encoder...the I-PAC.
I have only good to say about Randy and his products at GGG.
I haven't personally dealt with Andy or Ultimarc...but I hear the products are also good quality and Andy is also very helpful.
Xam
BobA:
If you want the full capabilities of the elec ice tb you need an led wiz to control the RGB leds. Trackball mounting plate is needed only if you want to use a plate to mount your TB. Some people mount without it. A keywiz is probably the best interface to order with your mix of parts.
pboreham:
--- Quote from: Xam on July 29, 2007, 10:26:14 pm ---You will at least need an encoder....check GGG for the Keywiz Max.
Also...Ultimarc has a very good encoder...the I-PAC.
I have only good to say about Randy and his products at GGG.
I haven't personally dealt with Andy or Ultimarc...but I hear the products are also good quality and Andy is also very helpful.
Xam
--- End quote ---
Thanks - are there any major differences between the keywiz and ipac2? I was set on the ipac to be honest, but I also prefer getting everything from one place. Would what I have selected work with both the keywiz and ipac?
Thanks again!
pboreham:
--- Quote from: BobA on July 29, 2007, 11:21:34 pm ---If you want the full capabilities of the elec ice tb you need an led wiz to control the RGB leds. Trackball mounting plate is needed only if you want to use a plate to mount your TB. Some people mount without it. A keywiz is probably the best interface to order with your mix of parts.
--- End quote ---
I am very interested in the LedWiz - and may get the LED buttons too.
How easy is it to configure and would it work with an iPac2 or just keywiz - or is it standalone.
Also, is it best to have the mounting plate for the trackball? What are the reasons for and against?
Thanks for your help!
Navigation
[0] Message Index
[#] Next page
Go to full version