Main > Main Forum
Atari "Volcano" Button Help
FrizzleFried:
These buttons have multiple connections...for the button functionality as well as the light. Does anyone know what connections are for what (ground, power for the light, etc).
grantspain:
get your meter out and check the continuity,when you press the button the dead short will be the switch and the lamp will not change and will have some resistance
SirPeale:
Not only that, but get it in your hand and physically look at it. Everything is pretty self-explanatory. You can see that the switch is separate from the light. Standard microswitch rules apply here. The light IIRC has + and - labeled, so you know how to hook up your LED.
ChadTower:
I have one in my hand as I post this. The left set of three have the NC and NO tabs labeled and the right set of two has the ground tab labeled. It also says they consume 0.1A at -125VAC.
-125VAC? Odd.
SirPeale:
That's what the switch can handle. 125V @ .1A
Navigation
[0] Message Index
[#] Next page
Go to full version