Main > Main Forum
Locked Cabinet + More
ZeroQuest:
I just acquired a Golden Tee Classic unit, machine appears to work, however the screen is blue with solid white diagonal lines. I cannot get into the cabinet since it didn't come with any keys. Would the best route be to drill out the locks, or is there another way? I did try inserting a quarter and the machine does work - sound works, trackball responds, etc. Hopefully something jarred itself loose on the trip to my home. ;D
If not, what am I looking at for a replacement monitor?
SirPeale:
Let's see some pictures. Is this a conversion or a dedicated GT?
ZeroQuest:
--- Quote from: Peale on May 19, 2007, 09:48:28 pm ---Let's see some pictures. Is this a conversion or a dedicated GT?
--- End quote ---
dedicated
Here's some pictures I just took. Sorry they're so big.
http://raptorscript.com/gt/01.jpg
http://raptorscript.com/gt/02.jpg
http://raptorscript.com/gt/03.jpg
http://raptorscript.com/gt/04.jpg
http://raptorscript.com/gt/05.jpg
http://raptorscript.com/gt/06.jpg
http://raptorscript.com/gt/07.jpg
http://raptorscript.com/gt/08.jpg
They're uploading now, so they may not work yet. Apologies in advance.
ZeroQuest:
http://raptorscript.com/gt/08.jpg
The video problem is shown in the picture above. My battery died, so this was the best of the 3 I took before it died on me. ;)
crashwg:
You could try to pick the lock... I've had pretty good results with using a regular sized paper clip for the pick and a larger one for the tension wrench.
All you have to do is apply a little torsion to the lock and gently scrub the pins back and forth a couple times.
Navigation
[0] Message Index
[#] Next page
Go to full version