| Main > Monitor/Video Forum |
| Soft-15KHz - slim new tool for 15KHz on normal vga cards |
| (1/485) > >> |
| SailorSat:
Hi. I just want to say that I'm releasing "Soft-15KHz" to the public. It's a simple tool programming videocard drivers to support 15KHz AND arcade resolutions. As on post, I support ATI Catalyst, NVidia ForceWare, Matrox PowerDesk and various 3Dfx Voodoo3/4/5 drivers. If you're intrested in details take a look at http://www.arcadeinfo.de/showthread.php?t=8170 |
| ahofle:
Thanks for coming out with this! Although I wish you had started working on this a bit earlier. Has any tried it out yet? |
| SailorSat:
Well my cab runs with two radeon 9200se without problems, and I've tried about 20 different video cards, and only a hand full made any problems. |
| ahofle:
What about all the POST/bootup screens? Aren't those in VGA (31khz) resolution? Could that damage an arcade monitor? |
| SailorSat:
Yeah they are 31KHz, but to be honest, neither my Hantarex nor any of the TVs I had hooked up (those SCART RGB stuff rocks!) did blow up or take any damage. They simply cannot sync to it. You could either use a J-PAC to filter out the BIOS screens, or you could enjoy a doubled bios output (like that "feature" on the J-PAC). A third, yet not that nice way would be to use a second (S3 Virge PCI or such) VGA Card for BIOS and OS loading screens, and then disable the S3 in Windows so your main Video Card takes over (in 15KHz). |
| Navigation |
| Message Index |
| Next page |