Main > Main Forum

Please help! Thickness of MikeDeuce's LED button discs?

<< < (2/5) > >>

Kaytrim:

--- Quote from: SavannahLion on April 19, 2007, 03:05:47 pm ---
--- Quote from: Red 5 on April 18, 2007, 08:05:13 pm --- 1/8" nominal

Jon

--- End quote ---

1/8"?? I thought they're thin sheets of vinyl-like material? Or am I thinking of somethng else entirely?

--- End quote ---

I believe that you are thinking about Mike's vinyl stickers.  These go inside the button and look like a sticker placed on a 1/8" piece of clear plastic.  There was also an optional white coating on the back side of the disk.  It really is bad that Mike has been MIA for several months.  His sticker sheets were real cheap and these disks were a nice, though not as affordable, option.

Red 5:

--- Quote from: SavannahLion on April 19, 2007, 03:05:47 pm ---
--- Quote from: Red 5 on April 18, 2007, 08:05:13 pm --- 1/8" nominal

Jon

--- End quote ---

1/8"?? I thought they're thin sheets of vinyl-like material? Or am I thinking of somethng else entirely?

--- End quote ---

The vinyl that is on them is only ~2.5 mil. The substrate is 1/8" ( the disk). I just got 50 blanks from a source in NM. to try and make my own. I have my own 24" cutter.

Jon

RandyT:

That didn't take long  ;D




I made the discs out of polycarbonate.  They just fit inside the plunger.




And here's the insert inside of a blue NovaGem.  The legend is made using the same outdoor adhesive vinyl and pigmented inks as I use with the NovaGemCDR pushbuttons.

I'll start working on some designs and either add them to the NovaGem options list or as a separate item (or both.)

RandyT

bleargh:

--- Quote from: RandyT on April 19, 2007, 06:17:07 pm ---I'll start working on some designs and either add them to the NovaGem options list or as a separate item (or both.)

--- End quote ---

RandyT, you're going to have to slow down a bit with the new ideas here... the list of stuff I want to order from you is long enough already...

 :notworthy:

Kaytrim:

--- Quote from: RandyT on April 19, 2007, 06:17:07 pm ---

And here's the insert inside of a blue NovaGem.  The legend is made using the same outdoor adhesive vinyl and pigmented inks as I use with the NovaGemCDR pushbuttons.

I'll start working on some designs and either add them to the NovaGem options list or as a separate item (or both.)

RandyT


--- End quote ---

:notworthy: Randy you are da MAN!  Defiantly offer them both ways. ;D  Now could you do some vinyl stickers for the standard buttons?


--- Quote from: bleargh on April 19, 2007, 06:34:26 pm ---RandyT, you're going to have to slow down a bit with the new ideas here... the list of stuff I want to order from you is long enough already...

--- End quote ---
Join the club. :hissy: ;)

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version