Main > Main Forum
CP Layout review request - 4 player 36" wide
vidmouse:
Yet another CP review request... I'm following Lusid's plans somewhat
but really want to get 4 player action vs trackball/spinner etc.
I saw a lot of CP's that used extra wide panels, but for my
game room was hoping to get something a bit narrower.
The CP box is already cut but not the holes for joysticks/buttons
yet. Any good feedback welcome, thanks!
vidmouse
Hoopz:
You can read discussion about if P3 and P4 should have their joys mounted at an angle or not. My suggestion is to do a mockup of what type, play on it and see how it feels.
I tried using angled joys on one CP and found it didn't work as well as I thought. YMMV.
yugffuts:
I would stand at your mockup with a friend, and see if you think playing SF2 or similar games would be comfortable. 36" wide for 4 players will have you all shoulder to shoulder, I think.
Kaytrim:
I found out the hard way. Make your mock ups before you cut wood. Otherwise you will have to try and extend the CP or start over. :cry:
vidmouse:
Thanks! Got a few ideas, think I might still be ok here... will post again when more is done.
Navigation
[0] Message Index
[#] Next page
Go to full version