Main > Buy/Sell/Trade - non-retail

FS Arcade Parts

<< < (2/3) > >>

SithMaster:

--- Quote from: bfauska on April 08, 2007, 11:45:34 pm ---Is that an over/under top door? and do the mechs work?  It looks like there is no graphic in the coin button but that's just a piece of plastic with black text usually right?

--- End quote ---

i looks like it could be from an over/under (most likely is) but i was going to us it as is for a project.  the inserts for 25 cents are just pieces of paper so you could open the red buttons up and put your own in.  the buttons arent the same size as an over/under door i have for my cab currently so im not 100% certain if itd work with other door frames.  there is only one mech in it now but i will put another inside it and test to make sure they work.  they should be for quarters though.


--- Quote from: shardian on April 09, 2007, 08:51:51 am ---Is that a Taito control panel that the SF CPO is on?

--- End quote ---

it could be.  is there any way for me to find out?  (check pics on klov or measure it and compare?).  last time i measured it the cp was about 23 inches across.

shardian:

--- Quote from: SithMaster on April 09, 2007, 11:28:47 am ---
--- Quote from: shardian on April 09, 2007, 08:51:51 am ---Is that a Taito control panel that the SF CPO is on?

--- End quote ---

it could be.  is there any way for me to find out?  (check pics on klov or measure it and compare?).  last time i measured it the cp was about 23 inches across.

--- End quote ---
I can measure up one of mine for comparison. I'll have to bring it to work with me tommorrow.
I am going to restore my Taito cab to Jungle king, but it would be nice to have a sfII layout CP I could just pop on occasionally. I have a Qix panel I was going to modify, but this would be much easier.

2PacMan:
Sith--pm sent concerning the midway coin door parts.

o-o:
I'll trade for the Competition (and that metal balltop stick beside it also if it fits with the Competition)
if you see anything from my trade items list:

http://forum.arcadecontrols.com/index.php?topic=61842.0

shardian:

--- Quote from: o-o on April 09, 2007, 02:21:39 pm ---I'll trade for the Competition (and that metal balltop stick beside it also if it fits with the Competition)
if you see anything from my trade items list:

http://forum.arcadecontrols.com/index.php?topic=61842.0

--- End quote ---

The balltop stick is for a wico base. It will fit into a wico microswitch joy, but I don't think it works in a competition.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version