Main > Main Forum

speaker help..

(1/2) > >>

squire:
im trying to mount some speakers in my cab..
if you see the pic attach im trying to use the same holes..


is it possiable to use  a set of shielded speakers from happs and interface them with a set of powerd pc speakers
like these?http://www.newegg.com/Product/Product.aspx?Item=N82E16836121123?
basically just wire them up to run istead of the satillites speakers

has it been done befor or does anyone have any advice what i can use?

BobA:
Might be easier to use the logitech satellites behind speaker cloth or grills,  that way you are sure you have the impedance match and the controls are built into one of the satellites so you would have to do less reconstruction.   You could still disassemble the satellites if required for easier mounting.   The subwoofer would go in the base of your cab.

Encryptor:
Check out this link to see if thats what you're trying to do. From the sounds of it you can get some good info from here.

http://www.oscarcontrols.com/speaker/index.shtml

Encryptor

mvolke1:
The above listed link for a speaker hack works great. The Real Bob Roberts has arcade speakers and grills that are cheap and good. You can pick up a set of PC speakers for next to nothing. In all I think I spent like $15 for everything.

squire:
thanks for the help guys

well i have one more quick question
will these 4" shielded speaker work
http://www.happcontrols.com/accessories/49022800.htm

with these pc speakers?
http://reviews.cnet.com/Altec_Lansing_VS2220_PC_multimedia_speakers/4507-3179_7-31349215.html?tag=nav

does it matter if the ohms match up or anything to that sort?
i hope im not repeating myself, i have those speaker laying around my house not being used..
just wanted to make sure if i do use those happ speakers and interface them with the pc one it wnat catch fire or short out anything?

thanks so much for the help
once again

Navigation

[0] Message Index

[#] Next page

Go to full version