Main > Main Forum
HAPP Monitor Bezels - Anyone out there have one?
DigitalFusion:
i would guess you score it with a razor knife and straight edge from the back. My concern is the joint between the cab and the bezel., and how you attach the lexan/glass to it?
fatfingers:
--- Quote from: ahofle on February 01, 2007, 11:17:06 am ---I'm also curious how do you trim the outsides of this thing to fit? Is it really hard/thick plastic?
--- End quote ---
It is easy to trim with a sharp (i.e. new blade) utility knife.
RayB:
I got one for 19" screens. I cut it with a Dremel and cutting wheel.
The interior "hole" pissed me off. It was for a 19", but there's an inner "lip" along the inside "hole" that in the end blocks out over half an inch of viewing area. Since MAME already varies screen output for different games, with some having black borders, I wanted to make absolute best use of the available screen space, so I ended up cutting away that inner lip. The results aren't perfect (irregular cuts), but its not that noticable...
geekinroot:
I just received the 27" flat monitor bezel from Happ and it's significantly smaller then the dimensions above. I'm at work so I don't have the exact dimensions but it was a few inches both ways. It was a little over 25" in the horizontal, which unfortunately puts it at about 3/4" too short for my 26" width. :( Anyone else get this size or did I get a bum one?
moriartyds:
--- Quote from: geekinroot on February 02, 2007, 12:20:01 pm ---I just received the 27" flat monitor bezel from Happ and it's significantly smaller then the dimensions above. I'm at work so I don't have the exact dimensions but it was a few inches both ways. It was a little over 25" in the horizontal, which unfortunately puts it at about 3/4" too short for my 26" width. :( Anyone else get this size or did I get a bum one?
--- End quote ---
Yikes, I was just about to order one. It does seem kind of weird they don't put dimensions on their website (at least from what I could tell).
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version