Main > Main Forum

Building my control board, suggestions appreciated

(1/2) > >>

mrserv0n:
I am so in envy of some of your guys machines I instantly was drawn into this project when I came across these on the web. So few questions

I was gonna go with those 8 way sticks from happ controls for 10 bucks each. Looked like that was the norm on most systems ive seen on the web. And budget is somewhat of an issue but I will make adjustments if it is necessary. So what control sticks do I want to buy? Do I want 360 degree ones? I am MOSTLY doing fighting games and beat em ups.
Heres a link to the ones I was thinking  http://www.happcontrols.com/joysticks/ultimate_joy.htm


And the buttons I chose the Ultimate Pushbuttons with microswitch http://www.happcontrols.com/pushbuttons/539200xx.htm
Do I want those or the competitive ones Shown here http://www.happcontrols.com/pushbuttons/5896xxl.htm or do I want something else?

Where do I buy the wiring for the joysticks and buttons to the board?

Lastly I am going with the I-PAQ 4 as my keyboard emulator from what I read this is the best choice for my 4 player setup.

Suggestions please post them here or email me mrserv0n18@aol.com

ahofle:
I used to have the Happ Competition joysticks but I didn't like the square restrictor on them in 8-way mode.  Made it very difficult to hit cardinal directions (was always catching a diagonal).  Games like Gauntlet were a pain in the ass.  I swapped them out for Happ Supers and have been very happy with those.  The competition pushbuttons are pretty standard and work well.

For the wiring, I used 8 conductor wire (came on a small spool at radio shack) similar to this:
http://www.smarthome.com/8460.html

Make sure you PM 'divemaster' or 'ponyboy' on these boards to buy the Happs stuff.  They are resellers and sell much cheaper than Happs, plus they don't rape you on shipping charges.

leapinlew:
I've used:

X-arcades 8 way
P360's 8 way
Wico 8way and 4 way
Magstik+ 4/8 switchable
Supers 8 way

The Wico is great for 4 and 8 way, but hard to find. All my current machines use Super 8 ways and I prefer them for my joysticks.

For the wiring, I've used the wiring spools from Home Depot in the doorbell department and thats worked fine. On my last machine I used wiring from a network cable soldered to the contacts and it's also working fine.

mrserv0n:
Thanks guys I ordered those competitive buttons. As for the sticks The Super 8 a reasonable  price and I will take your word on them since you both have experience. Only thing is there only black... Not to sound lame but it kinda messes my theme up LOL.
What does # Change actuation to 4-way or 8-way simply by flipping actuator over  - mean?  I don't know the terminology. Is this a pain to do?


Another Question, What are your thoughts on the 49 ways or 360s? Do they interfere with the typical 4/8 way games ?

ahofle:
I believe you can get aftermarket balltops to replace the black bat handles on the Supers.  Then you can get them color coordinated.  Just search for 'balltop super handles' and you should find them.

EDIT: here they are: http://forum.arcadecontrols.com/index.php?topic=57055.0

The other joysticks you mentioned are excellent all-around joysticks (probably the best), but they are pricy and the 49 way requires a separate encoder like the one from Groovygamegear.com.  If you are really mostly playing fighters, I doubt you will need the extra flexibility those give you.

Navigation

[0] Message Index

[#] Next page

Go to full version