Main > Main Forum

**NEW PRODUCT: Powermite DD power management solution**

<< < (7/7)

Jeff AMN:
Since this has been bumped, let me just say that I love this product. I used it to power my LEDs and a few other things in my project. It's slick, simple, and painless to use.

muzland:
Hi Whammoed,

Can the powermite do the following?

I have an old style wall mount jukebox that has a working carousel that I am installing a PC into as a Jukebox. The idea is that the PC using MP3 and appropriate jukebox software replaces the hideaway unit that used to contain the CD's and the user uses the existing button panel (via an IPAC or such) to select the songs.

The carousel is turned by pressing a momentary push button which applies 12v to the motor until a separate momentary switch is actuated and power is cut. The switching on and off of power used to be controlled by the wallbox MPU but this is toast.

Can the powermite handle the latching of the 12v (supplied by PC power connector) from a momentary button press until another button is pressed to cut the power so I can use this to turn the carousel?

I don't really want to drive this from the parallel port. I was looking for something simpler that did not really involve software control.

Cheers
Muzland

Navigation

[0] Message Index

[*] Previous page

Go to full version