Main > Software Forum

Minipac resets on reboot

<< < (2/6) > >>

jcrouse:
Now that you mention that, and trigger my aging memory, that is exactly what I did also. Thanks to Andy pointing me in the right direction and it completely solved my issue also and since everything is working great.

John

PS.....HEre is the sniplet from the Ultimarc wevbsite:

Problem: (USB Only) Board appears not to work until WinIPAC is run every time. Yellow exclamation marks in Control Panel, Device Manager.
This is a rare problem, and is caused by a registry error. It is suspected that this problem occurs if the board is regularly swapped from one USB port to another, or different board versions used on the same PC. Microsoft have been alerted to this problem. To fix this problem, download this file: Ipacfix and click on it. This deletes all references to the I-PAC in the registry. Then unplug and reconnect the board. If you would rather do this manually here is what to do:
The fix involves registry editing, the usual caution should be observed.
Run regedit, and open Hkey_Local_Machine/System/CurrentControlSet/Enum/HID and delete the keys containing VID D209 Also Hkey_Local_Machine/System/CurrentControlSet/Enum/USB and delete the same keys. You might have to right-click and set permissions to do this. Unplug and re-connect the board.

loadman:

--- Quote ---I think you guys are way off here or are misinterperating something
--- End quote ---

misinterpret?   ???   Mine was put as a 'Question'
My further suggestion was only valid if the question were true.  ;)

jcrouse:

--- Quote from: loadman on December 12, 2006, 03:40:51 pm ---
--- Quote ---I think you guys are way off here or are misinterperating something
--- End quote ---

misinterpret?   ???   Mine was put as a 'Question'
My further suggestion was only valid if the question were true.  ;)

--- End quote ---

Loadman ..... I was referencing the individual that made the statement about PS2/USB and the saving of settings. I could be wrong but it doesn't sound logical to me and is not the way my USB minIpac works. I WILL be more specific next time.

John

loadman:
Sorry I was having a bad day  ;D

jcrouse:

--- Quote from: loadman on December 13, 2006, 04:01:32 pm ---Sorry I was having a bad day  ;D

--- End quote ---

NP ... made me laugh.

John

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version