Main > Main Forum

New Product: TurboTwist 2 - The Ultimate Spinner / Paddle control ! From GGG!

<< < (47/62) > >>

Havok:

--- Quote from: Tiger-Heli on December 14, 2006, 07:01:28 am ---Invert your invaders design - i.e. instead of a blue invader on a brushed metal background, a Silver Invader on a black background.
--- End quote ---

I second that one !!!

RayB:

--- Quote from: Time Pilot on December 15, 2006, 09:15:20 am ---Randy, this is one cool spinner!

Could you be more specific on what needs to be done to connect a trackball to the new OptiWiz (specifically a Happ).  You mentioned popping a resistor across the data lines before the trackball is connected.  What would the recommended resistor values be?  It would be fantastic to use the Spinner on Z and the Trackball on X/Y- it would replace my serial Opti-Pac and my problem of mouse IDs switching would be solved.  So many problems solved at once makes the TT2 cheap!  :dizzy: :notworthy:

Wohooo!

--- End quote ---

Should be a whole new thread.

RandyT:

--- Quote from: Time Pilot on December 15, 2006, 09:15:20 am ---Could you be more specific on what needs to be done to connect a trackball to the new OptiWiz (specifically a Happ).  You mentioned popping a resistor across the data lines before the trackball is connected.  What would the recommended resistor values be?  It would be fantastic to use the Spinner on Z and the Trackball on X/Y- it would replace my serial Opti-Pac and my problem of mouse IDs switching would be solved.  So many problems solved at once makes the TT2 cheap!  :dizzy: :notworthy:

--- End quote ---

The resistor thing was before I did any trackball testing with the modified hardware.  I tried both an Atari and Betson/Imperial trackball and they work fine on the Master board with no modifications.  I haven't specifically tried the HAPP, so I can't say for sure.  But I have high expectations ;)

RandyT

nostrebor:

--- Quote from: RandyT on December 15, 2006, 11:26:09 am ---
--- Quote from: Time Pilot on December 15, 2006, 09:15:20 am ---Could you be more specific on what needs to be done to connect a trackball to the new OptiWiz (specifically a Happ).  You mentioned popping a resistor across the data lines before the trackball is connected.  What would the recommended resistor values be?  It would be fantastic to use the Spinner on Z and the Trackball on X/Y- it would replace my serial Opti-Pac and my problem of mouse IDs switching would be solved.  So many problems solved at once makes the TT2 cheap!  :dizzy: :notworthy:

--- End quote ---

The resistor thing was before I did any trackball testing with the modified hardware.  I tried both an Atari and Betson/Imperial trackball and they work fine on the Master board with no modifications.  I haven't specifically tried the HAPP, so I can't say for sure.  But I have high expectations ;)

RandyT

--- End quote ---

I was getting ready to ask this myself...

Thanks for checking them out for us!

PoDunkMoFo:
Is there really a better reason to have a spinner?

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version