yoke impedence info needed

[grantspain]

o.k guys i am helping someone out with an ongoing problem and we have finally got to the bottom of the fault.
the yoke has had some wires removed at some point (obviously to try and match another chassis),now the wires are still there but they are hanging from the yoke.
unfortunately this monitor is about 5000 miles away so i can't see it and the guy does not have access to a camera
my question is does anyone know what the yoke impedence of the vertical and horizontal should be on the chassis
tube-samsung A48KRD82XO2
chassis- kortek ktm-f 20
now i am pretty sure this yoke is the same used on hantarex mtc900,mtc9000,early polo1,intervideo and all early korteks
if anyone knows any info or links please let me know otherwise i will have to wait until monday

[Rickn]

Hi Grant, I donot have the specifics on that tube, but here are some typical values, the first numbers after "Yes"  is Horizontal Inductance, the Horizontal resistance, next vertical
You can use them as typical design values- problemis Kortek, did not always follow "good design", Hope it helps

Rick Nieman

Nieman Video Displays

19"   Chungwa   M48AHF11X01   90   DMX-0101C1   VGA   YES   0.38   0.6   7.9   3.7
19"   Chungwa   A48AGY13X57   90   ZEC-72003   CGA   YES   1.89   1.8   28.3   13.6
19"   Chungwa   A48AGY13X57   90   ZEC-72013C2   VGA   YES   0.39   0.4   7.4   2.9
19"   RCA   M47AGW37X03   90   48F2EGB/00   VGA   YES   0.4   0.5   16.9   8.2
19"   RCA   A48AAB13X02   90   51F1TRZ/00   CGA   YES   3.12   3.6   23.3   11.7
19"   RCA   A48AAB13X   90   DAG4079M   VGA   YES   0.4   0.6   4.8   2.7
19"   RCA   A48AAB13X   90   DAG4150M   CGA   YES   1.94   2.4   27.1   12.5
19"   RCA   A48AAB13X02   90   DAG4183M   CGA   YES   1.95   2.3   27.4   12.6
19"   RCA   A48AAB13X02   90   OE-9530   CGA   YES   1.8   1.9   28   12

[Kevin Mullins]

Another person to maybe ask directly is Joey: http://www.jomac.net.au/index.htm

Email for General Information:
jomac@jomac.net.au or joey@indigo.net.au