Main > Main Forum
Joystick stuff I messed some things up!??!!?
rdowdy95:
Hey guys I ordered the 4 way MS PacMan stick with the longer handle from Tornando Terry. Here is my problem. First I took it apart, and now I can't remember how it went back together. First of course I have the ball top piece with the skinny silver shaft connected. Then I have the longer metal spacer over that with the black dust cover. Then I have a black piece. This piece is going kind of like wider side on top and the bottom of that piece is narrower. Then of course those are on the top part of the base of the stick. Then I have the white piece that looks like the same as the black piece but on the bottom of the stick and base. Then under that is the little C-Clip. that fits in the groove. Now the white piece on the bottom I don't remember which way this piece goes. But I have it right now the narrower side down with the C-clipped snapped on the bottom of the metal rod. Is this right???
Also was messing with one of my Supers and the E-Clip thing shot off somewhere on the carpet in my dirty ass computer office room> Can't find it anywhere. Anyone know where I can order one of those lil (#$*($s. Or can anyone send me a free one.
AlanS17:
You can find clips at most good hardware stores. Don't look in placces like Home Depot. Check the locally owned shops.
johnm160:
Depending on the size you can find a pretty good assortment of E clips in some autoparts stores also.
rdowdy95:
Also does anyone know if the eclip for the Super is the same as the 4-way Pac-Man stick??? Cause it was actually the eclip I lost for the Ms PacMan stick, but I put one of my super eclips on there and it holds it fine.
Still wondering if I set the MS Pacman stick back up correctly though.???
rdowdy95:
Like should the actuator go like this???? Like this pic when I move stick in a 360 circle it only hits one microswitch at a time. Now if I flipped the actuator over it from the pic say the actuator was the other way with the wider part of the actuator it would sometimes hit two switches at a time. So is the look in the picture right?
Navigation
[0] Message Index
[#] Next page
Go to full version