Main > Main Forum
need advice sorta i dont want to look like an idiot...lol lowes cutting the wood
danny_galaga:
--- Quote from: robot8319 on October 28, 2006, 02:46:46 am ---i figured i wasnt going to use t-molding as i can sanddown the corners and as for paint i already have some primer..all i need is matteblack paint right?
and i checked the prices on wood earlier its quiet cheap around $10 a pop i think i can do it.
i already have the following..
pc
21" monitor
arcadestick
2x4's
i am going to opt out on a coinmech for now...
all i need is the sheets of wood cut and i would be good to go.
--- End quote ---
you going to put it together with flour paste? screws and glue are going to cost SOMETHING...
robot8319:
i got an unlimited supply of screw dont know why i left that out if not i will do it with hammer and nails..
Encryptor:
I'm new to this and I don't claim to know a great deal about it. I also don't want to be a rain on your parade but my button and marquee retainer order alone was about $65. I can't possibly see you doing this for $40.
Encryptor
javeryh:
I'm with leapinlew on this. $40 is impossible even if you just need wood. Also, Lowe's isn't going to cut everything precisely and they definitely aren't going to cut anything that's not straight. I can't count the times I ran to Home Depot to pick up "one last thing I forgot." I also tried to meticulously plan everything to the last penny on an Excel spreadsheet and right now (I'm 90% complete) I'm about $300 over budget on things I didn't think of until I started. Your budget will be blown on your second trip to the store.
I don't want to dampen your spirits but I think you should know what you are getting into. This is an expensive hobby. If things are that tight I'd hunt around for a free gutted cab and start from there. You can fix that up with some bondo, sandpaper and a fresh coat of paint. That's the cheapest way to go I think... Good luck!!
CheffoJeffo:
I dunno why you guys all think building a cab from scratch for under $40 is impossible ... it is definitely possible ... of course the cab will be the size of a small stool. :dizzy:
Now, robot8319, doing a project like this for under $40 IS possible if you can get a cheap/free donor cabinet (and have the rest of the components on hand). Have a look in the B/S/T board here, on RGVAC, check Craigslist in your area.
You may have to be patient, but free cabs do come up, depending on where you are. So, where are you ?
Cheers
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version