Main > Main Forum

Coin Door Light Wiring Question

(1/1)

codeena:
Hi all,

I'd like to extend wires from my coin door lights' to my pc's molex cables that will power the lights. Can I just splice and use a PC power cord's wires to use as an extension, or would this be dangerous (different gauge, etc.)? Does it matter which of the 3 wires I use, if it's okay? Thanks in advance!

Aurich:
What voltage are your lights? You can bring 5v or 12v from your power supply (red or yellow wires respectively) easily. So you pick a color, and the black is your ground.

codeena:
Hi Aurich, thanks for the reply. The 12v lights to work fine connected to the pc, but need to extend the wires from the lights to the pc. So I was wondering if a pc power cable would serve well as the extension wires.

fatfingers:

I think just some standard 18 or so gauge wire and some wire connectors should be all you need.

Navigation

[0] Message Index

Go to full version