Main > Main Forum

Happs Super - Unresponsive

<< < (2/2)

madk:
I cut 1 1/8" holes and centered the stick perfectly.  The panel is only 1/2" + 1/8" plexi.

I'll have to double check to make sure it isn't catching on something as I am at work right now.

ahofle:
Sounds like you definitely narrowed it down to a mechanical issue then.  Can you lift the dust washer and see if the shaft is hitting against the wood/plexi while moving the stick around?  Also, have you examined the Super parts diagram from Happs to make sure all the stick parts are assembled correctly?

Stingray:
Easiest thing to do would be remove the stick from the panel. If it works when not mounted then the problem is that it's binding on the panel. If it doesn't then something isn't assembled correctly.

-S

Torc:
make sure you've installed the rubber things on the bottom of the stick correctly, if they are on upside down, they function as a 4 way stick

Navigation

[0] Message Index

[*] Previous page

Go to full version