Main > Software Forum
ZSNES and Mamewah
Turnarcades:
Er, yes Jedi, I think so.
You won't be able to copy this text directly into your config file though, as some of the lines are different for the older MAMEWAH version. Just copy any relevant lines over to your config file individually.
I know you probably don't want to hear this, but I'm assuming you only went for MAMEWAH 0.97 'cos there was a config tool for it. I found I had lots of trouble with this as the tool just adds another element of confusion to the less-than perfect code in this version. You may do well to upgrade to a newer MAMEWAH version as there is much more support for it and the base structure of the installation is now drastically different to 0.97. It is better laid-out and makes for less errors.
Plus, you can get results in the forums like the guy I just helped out!
Jedirampage:
Yeah i just realized that and I have switched to Mamewah v 1.62 beta, I currently am trying your .ini file and will be replying back by the end of the day with the results.
Jedirampage:
I still can't get anything to work, here is a copy of my .ini file if it helps
### SNES.ini (mamewah v1.62) ###
emulator_title SNES
### List Generation Settings ###
rom_path C:\SNES\ROMS
rom_extension zip
dat_file
nms_file
catver_ini_file
list_generation_method rom_folder
### Execution Settings ###
pre_emulator_app_commandlines
emulator_commandline C:\SNES\zwsnes.exe
post_emulator_app_commandlines
general_app_commandlines
### Artwork Settings ###
artwork_image_paths C:\SNES\artwork
movie_preview_path c:\mame\previews
movie_artwork_no 1
enable_fuzzy_search 0
### Screen-Saver Settings ###
enable_music_in_screensaver 1
select_random_game 0
saver_type gamelist_slideshow
movie_path
movie_fullscreen 1
quit_delay 0
saver_commandline
### Additional Settings ###
music_path
lcd_display_file_path
### Settings used by MAMEWAH ###
current_list 0
unclet:
It would seem to me the "emulator_commandline" should be the following:
C:\SNES\zwsnes.exe "[rompath]\[name].[romext]"{nodosbox}{safelaunch}
Your current "emulator_commandline" just specifies the EXE to use but does not tell the zsNes emulator where the ROM file is located ......
AMDman13:
Mines working sweet!
### snes.ini (mamewah v1.61) ###
emulator_title snes
### List Generation Settings ###
rom_path c:\emulators\snes\roms
rom_extension zip
dat_file
nms_file
catver_ini_file
list_generation_method rom_folder
### Execution Settings ###
emulator_executable c:\emulators\snes\zsnesw.exe
commandline_format "[rompath]\[name].[romext]"{nodosbox}{safelaunch}
alt_commandline_format_1 [name]{autodosbox}{nosafelaunch}
alt_commandline_format_2 [name]{autodosbox}{nosafelaunch}
game_specific_config_path
### Artwork Locations ###
artwork_1_image_path c:\emulators\snes\snap
artwork_2_image_path
artwork_3_image_path
artwork_4_image_path
artwork_5_image_path
artwork_6_image_path
artwork_7_image_path
artwork_8_image_path
artwork_9_image_path
artwork_10_image_path
movie_preview_path i:\zsnesw\videos
movie_artwork_no 1
### Screen-Saver Settings ###
enable_music_in_screensaver 0
saver_type slideshow
movie_path
movie_fullscreen 1
quit_delay 30
wrapper_executable
wrapper_commandline_format [name]{nodosbox}{nosafelaunch}
scr_file
### External Application Settings ###
ipc_file_or_path
app_1_executable
app_1_commandline_format
app_2_executable
app_2_commandline_format
app_3_executable
app_3_commandline_format
auto_launch_apps
### Additional Settings ###
music_path c:\mamewah\music
lcd_display_file_path
lcd_fe_text
### Settings used by MAMEWAH ###
current_list 0
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version