Main > Main Forum

Marquee retainer

(1/2) > >>

SithMaster:
i just got my happs retainers and im fairly certain i should tape off the area im going to be drilling to prevent cracking.  what kind of tape should i use.  masking right.

SteveJ34:
You can tape off using masking but I dont expectyou will have any problem with the few holes you need to mount.

Its plastic not plexi or lexan....

...best of luck.

Steve

SithMaster:
ah then it is just me being worried.  what about using a small bit then a larger bit?  just worried it will crack.  if anything ill drill the center hole for the top to see how well it goes.  thanks.

NightGod:
Put a piece of wood behind it to help steady it and drill away. Plastic drills very well-better than wood, IMHO.

Czapala:
I would not worry.  When I got my Happ retainers I used a tablesaw to cut it to the right length.

Heck I even used the table saw to trim off the extra from the bezel I got from Happ.  :dizzy:

So I don't think a drill will crack it.

Navigation

[0] Message Index

[#] Next page

Go to full version