Main > Main Forum

PC Power supply Hacking

(1/2) > >>

sealslayer:
I need to run some cold cathode tubes and fans for my cab but I want to use a separate power supply from my PC to keep potential problems to a minimum.
I've been googling and found you can short pins 14 and 15 but it also says you need to have a MOBO attached as the PSU is waiting for a return current to it.
Is there another way of doing this? I would like the PSU to have a switch in the cab so I can turn it on and off manually.
Cheers  ;D

SirPeale:
No, that should work just fine without the mobo.

fatfingers:


Agreed.  The short works just fine for me.

sealslayer:
Damn, I've tried this now on two power supplys and nothing happens, I hope I'm shorting the correct two, theres a clip that fits into the mobo between 15 and 16 is this correct?

SirPeale:
Usually it's a green wire.  Short that to any ground.  Ground will almost always be black.

Navigation

[0] Message Index

[#] Next page

Go to full version