Main > Software Forum
MAMEWAH v1.62b12 for BETA testing!
Minwah:
MAMEWAH v1.62b12 (25/08/06)
Improvements / Changes:
Altered check for xml2info.exe to allow xml2info.bat too, for Kricks xml2info xsl batch file,
Added 'list_generation_method rom_folder_vs_listxml' for MAME v0.107+ (*),
Added 'list_generation_method verifysets_vs_listxml' - probably redundant as -verifysets no longer exists but may be of use with older MAME versions (*),
New listxml parsing allows multiple display types and controls for improved filtering,
Added 'Show ALL BIOS' and 'Show NO BIOS' options in 'BIOS Filter' menu,
Added 'Show ALL Input Types' and 'Show NO Input Types' options in 'Input Type Filter' menu,
Improved BIOS Filter to show descriptions rather than romnames.
(*) NOTE: due to differences in listxml outputs from different versions of MAME, some info may not be available (MAME v0.107-0.108 currently tested OK)
http://www.mameworld.info/ubbthreads/showthreaded.php?Cat=&Number=84904&page=0&view=collapsed&sb=5&o=&fpart=1&vc=1&new=
MKChamp:
This is wonderful news....let me make sure I understand the following comment:
This is very similar to the last release, but with some fairly major list generation additions - namely built-in parsing of mame -listxml, which should remove the need for xml2info as far as Mamewah's concerned.
Does this mean we do NOT need krick's exe OR bat file and your app will generate lists again?
MKChamp:
I'm getting the following error:
8/25/2006 2:07:51 PM Error: 13 Type mismatch in ReadLSTFile
8/25/2006 2:07:57 PM Error: 55 File already open in INI_SaveConfig
8/25/2006 2:07:57 PM Error: 55 File already open in EMUINI_SaveConfig
8/25/2006 2:07:57 PM Error: 55 File already open in LISTINI_SaveConfig
8/25/2006 2:07:57 PM Mode 1024 x 768 @ 60Hz, 32bit colour selected after 1 attempt(s) at 1/2 second intervals.
8/25/2006 2:07:57 PM MAMEWAH quit
I'm sure I'm missing something easy...any suggestions?
Breaker:
Hello all,
I'm running MAME 079 and 101 and I've had no problems generating a list for either of these versions. However, I noticed that (as Minwah warned) I'm missing some information when the game data is displayed, plus some data is repeated. For example, here is what's displayed for Robotron:
----------------------------------------------------------------------------
Robotron [Solid Blue label]
Robotron
1982 Williams
,
buttons
Status Good [Good], Color Good [Good], Sound Good [Good]
----------------------------------------------------------------------------
The "," and "buttons" and duplicate "[Good]" are present regardless of the game selected.
Otherwise things seem to work as expected.
mamewah.log:
MAMEWAH v1.62 launched
Cursor scheme: Windows Default, Arrow: (None), Wait: (None), AppStarting: (None)
Desktop colour: 10841658
Wallpaper filename: C:\Documents and Settings\GBertrand\Local Settings\Application Data\Microsoft\Wallpaper1.bmp
Desktop display mode: 640x480 @ 200Hz, 16bit colour
Decimal symbol: '.'
Games list read: mame-0.lst
Mode 640 x 480 @ 60Hz, 16bit colour selected after 2 attempt(s) at 1/2 second intervals.
Layout selected: E:\mamewah162b12\config\layout.lay
No. joystick devices attached: 0
Ctrlr file selected: E:\mamewah162b12\config\mamewah.cfg
Keyboard enabled
List generation started...
does not exist in ReadDAT.
Current drive/directory selected: e:\mame101
Commandline run: C:\WINDOWS\System32\cmd.exe /c e:\mame101\mamepp.exe -listxml > E:\MAMEWA~1\mame.xml {flags=81}
Application quit: C:\WINDOWS\System32\cmd.exe /c e:\mame101\mamepp.exe -listxml > E:\MAMEWA~1\mame.xml
Current drive/directory selected: e:\mame101
Commandline run: C:\WINDOWS\System32\cmd.exe /c e:\mame101\mamepp.exe -listfull > e:\mame101\listfull {flags=81}
Application quit: C:\WINDOWS\System32\cmd.exe /c e:\mame101\mamepp.exe -listfull > e:\mame101\listfull
List generation finished
Games list read: mame-0.lst
Mode 640 x 480 @ 200Hz, 16bit colour selected after 1 attempt(s) at 1/2 second intervals.
MAMEWAH quit
Breaker.
Breaker:
--- Quote from: breaker on August 25, 2006, 11:49:15 pm ---Hello all,
I'm running MAME 079 and 101 and I've had no problems generating a list for either of these versions. However, I noticed that (as Minwah warned) I'm missing some information when the game data is displayed, plus some data is repeated. For example, here is what's displayed for Robotron:
----------------------------------------------------------------------------
Robotron [Solid Blue label]
Robotron
1982 Williams
,
buttons
Status Good [Good], Color Good [Good], Sound Good [Good]
----------------------------------------------------------------------------
The "," and "buttons" and duplicate "[Good]" are present regardless of the game selected.
Otherwise things seem to work as expected.
mamewah.log:
MAMEWAH v1.62 launched
Cursor scheme: Windows Default, Arrow: (None), Wait: (None), AppStarting: (None)
Desktop colour: 10841658
Wallpaper filename: C:\Documents and Settings\GBertrand\Local Settings\Application Data\Microsoft\Wallpaper1.bmp
Desktop display mode: 640x480 @ 200Hz, 16bit colour
Decimal symbol: '.'
Games list read: mame-0.lst
Mode 640 x 480 @ 60Hz, 16bit colour selected after 2 attempt(s) at 1/2 second intervals.
Layout selected: E:\mamewah162b12\config\layout.lay
No. joystick devices attached: 0
Ctrlr file selected: E:\mamewah162b12\config\mamewah.cfg
Keyboard enabled
List generation started...
does not exist in ReadDAT.
Current drive/directory selected: e:\mame101
Commandline run: C:\WINDOWS\System32\cmd.exe /c e:\mame101\mamepp.exe -listxml > E:\MAMEWA~1\mame.xml {flags=81}
Application quit: C:\WINDOWS\System32\cmd.exe /c e:\mame101\mamepp.exe -listxml > E:\MAMEWA~1\mame.xml
Current drive/directory selected: e:\mame101
Commandline run: C:\WINDOWS\System32\cmd.exe /c e:\mame101\mamepp.exe -listfull > e:\mame101\listfull {flags=81}
Application quit: C:\WINDOWS\System32\cmd.exe /c e:\mame101\mamepp.exe -listfull > e:\mame101\listfull
List generation finished
Games list read: mame-0.lst
Mode 640 x 480 @ 200Hz, 16bit colour selected after 1 attempt(s) at 1/2 second intervals.
MAMEWAH quit
Breaker.
--- End quote ---
Navigation
[0] Message Index
[#] Next page
Go to full version