Main > Main Forum
Does this theory sound right for swappable CPs using patch panel/cat5e
ArtMAME:
I used CAT5 cables and Female to Female RJ-45 couplers:
http://forum.arcadecontrols.com/index.php?topic=54556.msg534960#msg534960
My multi-purpose CP has four CAT5 cables connected to it that correspond to J1, J2, J3 (4-way) and 7 Buttons. I have a separate CAT5 cable for the admin buttons. The admin buttons stay on the base of the control panel.
My IPAC also has CAT5 cables terminated with RJ-45s. I just label the couplers so I know which one to plug in to what.
I have a different drop-in panel for each control scheme that I use. So far I have a multi-purpose CP, a Trackbal w/ 3 button setup, a 49-way, and a Tron CP. I have a USB hub for trackballs and analog sticks inside the CP box, plus a PS/2 extension cable for a mouse PCB that I hacked for my Tron spinner.
This setup works really well. It takes me less than a minute to switch out panels.
My next drop-in panel will probably be a fighter-style 2 sticks and 6 buttons per stick.
Good luck :cheers:
Navigation
[0] Message Index
[*] Previous page
Go to full version