Main > Main Forum
Cleaning up Coin Doors?
bleemus:
I actually stripped my coin doors of all paint first, it is a pain, but I think it is worth it. Then I sanded down the rusty parts and used a hammer to bang out any dents. Then I simply cleaned it real good, and hit it with rustoleum spray paint 3-4 times. It turned out real nice.
Details and pics of the process are here:
http://bleemus.spaces.live.com/blog/cns!45B4CF2BD298BCA1!240.entry
Ken Layton:
Use the BLUE masking tape to mask off everything.
NightGod:
I just used Goof-off to get rid of sticker residue/gunk and then a wire brush to get rid of the rust. The I hit the whole thing with Rustoleum Appliance Enamel. Whole process took maybe 20 minutes and I think it looks pretty great:
Here's the pic of the door when I bought it:
Here's a couple pics of the door now, the thing is so shiny it's difficult to get a decent shot:
RayB:
Banacek:
Rule #1 is always do things the right way.
In this case it would have meant removing the doors and door frames. If you feel inside, you'd see it's mounted with bolts.
#2: Masking tape is too sticky for paint jobs. Use the green or blue painting tape.
I still think removing the doors will make it much easier to clean up.
Banacek:
--- Quote from: RayB on August 03, 2006, 04:09:06 pm ---Banacek:
Rule #1 is always do things the right way.
In this case it would have meant removing the doors and door frames. If you feel inside, you'd see it's mounted with bolts.
#2: Masking tape is too sticky for paint jobs. Use the green or blue painting tape.
I still think removing the doors will make it much easier to clean up.
--- End quote ---
I didn't realize the doors came off so easily. I've since removed them.
http://img155.imageshack.us/my.php?image=frontagainir8.jpg
http://img379.imageshack.us/my.php?image=coindoorsqs5.jpg
Now that they're off, I'm going to redo the front and the doors. The thing about the tape is, I bought Painters Tape. And it wasn't the cheap stuff too. I mean, I got it in the painters section. I think the Arizona heat is what really made the tape melt like that. At least that's what I think :)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version